Payment & Shipping Terms:
|Model Type:||Analogy Style||Detection Method:||Magnetic Induction|
|Detection Adjustment:||Adjust The Level 1-12||Alarm Method:||Sound/light Alarm And Return, Then Restarts Again|
|Pated Consume:||140W||Tunnel Size:||Customized 600*200mm|
broken needle detector,
garment needle detector
Textile and garment industrial conveyor belt broken needle metal detector for sale
Metal Detector Calibration Checklist:
Switch on the machine and set the sensitivity level to less than 1.2mm sphere.
Position the test card directly onto the conveyor belt at position A1.
Let the card pass through the search head.
The metal detector is being activated and the alarm is sound.
Repeat the above steps 1-3 with the test card in positions A2 and A3.
Again the detector is being activated and the alarm is sound.
The test card is putting through on its own, we are not put it on a paper or put it through with a garment.
Repeat steps 1-3 with the test card positioned in the middle of a stand (7-8cm high) or on top of a stand that is around 3-4cm high (depending on the height of the gap between conveyor belt and top of machine) at positions A4, A5, A6.
Again the metal detector is being activated and the alarm is in sound. The stand are being a non-detectable block made of plastic material.
Repeat steps 1-3 with the test card on the top of a stand (7-8cm high or as high as the gap allows for) at positions A7, A8, A9 and again the metal detector calibration procedure are being activated and the alarm are in sound.
Records are being kept of all of these checks by using the prescribe form.
In case the machine fails to pass the calibration test, it is immediately being turned off and re-calibrated by an authorised technician. All goods checked after the last calibration is being re-checked once normal operations of the detector have been re-established.
The apparel industry, surrounded by need to produce a variety of products in small quantities to meet personalized, diversified taste of consumers and by competition from imported goods, challenges quality, delivery and cost every day.
Many sewing factories are competing to introduce new production systems to improve their productivity and supply products at short delivery time. A task as important as productivity improvements is to improve quality of sewn products. Quality of products is said to reflect the philosophy of the manufacturer.
Attentive inspection is a must to prevent product from being shipped out with hand sewing needles or sewing machine needles left inside. A needle detector is one of the most important inspection equipment in quality control of sewn products.
The production line in sewing factories consists of processes of cutting of raw materials, sewing, finish, inspection and packaging. Product coming out of the production line are packed in cartons and shipped out. In the normal production line, a conveyor type needle detector is installed after the finishing process to check for needles in products. In other arrangement, inspected and bagged products are passed trough the needle detector.
There are other types of needle detectors available to accommodate various types of apparels or various types of products contracted to sewing contractors.
Quality is one of the biggest pillars to support the manufacturer. Attend to "peace of mind" in your products with the needle detector.
|Detection method||Magnetic induction.digital process double sensor|
|Detection width||Net width 600mm-non-standard sizes(custom)|
|Detection adjustment||Touch screen adjust the level 1-12|
|Alarm method||Sound/light alarm and return, then restarts again|
|Power supply||Ac220V 50-60Hz|
Use Range :
Garment .Textile.underwear .towel. Sanitary and so on industry .
Contact Person: bill