50-60HZ Needle Inspection Machine 600*150mm For Garment Industry

       Needle metal detector machine needle detector for garment industry

       The food manufacturing and pharmaceutical sectors have used metal detectors for over fifty years now, where their use is virtually mandated by the product liability legislation and general food safety requirements. On the other hand the use of metal and needle detectors in the garment manufacture industry is quite new.

Just a couple of incidents in which broken needles turned up in children’s clothing during the early 1990s particularly one in which a baby’s face was scratched - very quickly alerted many retailers in Britain to the potential danger caused by broken needles left behind in garments. The risks this entailed, legal and financial, as well as loss of reputation, were sufficient to convince them of the need for implementing formal needle detection procedures which did not rely on human intervention alone.

As a result, their garment suppliers throughout the world were instructed to check all baby and children’s wear for metal contamination, with the help of metal detectors such as needle detectors, usually as part of an overall safety policy aimed at eliminating any opportunity for metal pieces like broken needles, from any source, to contaminate the clothing in the first place.

Now an increasing proportion of retailers are extending this instruction, of using conveyor type needle detectors, to other forms of clothing, as well as shoes, laying down a mandatory needle detection procedure and, like Japanese retailers who have insisted on this procedure for the last ten years, fining suppliers if metal contamination is found in clothing.

A recent Survey and Study indicated that there is more than 7 to 11 garments are contaminated by broken Needles in a sample size of 1000 Garments.

Shoes generally present a greater risk of needle breakage than garments, simply on the basis of material thickness and hardness. But there can be an additional problem in the form of staples used temporarily in sports shoes to secure soles and uppers during vulcanization. Usually these are removed manually after the shoe is finished, but in recent metal detectors commissioning trials at a shoe manufacturer in Asia, three staples were found in the first 400 pairs through the machine.

Product Features:

1. Mechanism exported from Japan, conveyor belt exported from Holland, non-toxic, new coil technology, computer chip integration adopt digital circuit.
2. Specially has the protection circuit, it will auto-stop if no detection goods in 10 minutes, Ad Hoc lightning protection circuit leak.
3. All the function keys are touching-type keys,8 locations can display the accurate position of broken needle
4. 3 ways to alarm: sound, light, and frequency
5. Open all of the features set the total power; the motor does not start before the completion of.
6. Can calculate the qualified and unqualified and unqualified amount
7. It has two sets of detectors, double testing to ensure results
8. Strong anti-disturbance (no wrong alarm to the ceiling fan, mobile phones, screwdrivers, etc )
9. Pipelined appearance, ABS shell, steel structure, first-class baking process, to ensure the detection of the machine stability ,good performance, long service life.

Parameters: