Payment & Shipping Terms:
|Tunnel Size:||1000*1000mm||Application:||Cargo X Ray Screening|
|Load Ability:||200KG||X Ray Penetration:||30mm Stailness Steel Above|
|Conveyor Speed:||0.22meter/second||Operation Table:||Two|
|Screen:||Black And Colorful||Anode Voltag:||100-160KV|
|Noise:||Less Than 65DB|
Security x ray cargo inspection system /x ray luggage scanner screening machine
1. Alarm by sounds & light::Alarm by sounds and light when conform to condition.
2. Network interface:Could be connect local area network and support multi-terminal check baggage at same times
3. Safety ray:Transmit ray under automatic control, avoids the miss.
4. Turn off by a key control:Turn off the machine only need one step:revolves the key. The equipment automatic security close-down, does not need complex many steps, is simpler.
5. Eagle-eye:Could be expediently observing enlargement area.
6. Estimate malfunction by self:Automatic estimate malfunction and prompt message, helpful for the maintenance.
Tunnel Size: 1000(W)×1000(H)mm
Conveyor Speed: 0.22 m/s
Conveyor Max Load: 200 kg
Single inspection dosage < 1.5µGy
Wire Resolution: 0.1mm metal line
Steel Penetration: 30MM armor plate
Film Safety: For ISO 1600
Maximum leakage radiation <0.3µGY/H
Orientation: Vertically Upward
Tube Current: 0.4~1.2MA(adjustable)
Anode Voltage: 100~160 KV(adjustable)
Generator cooling/working periods Sealed oil bath with forced air/100％
IMAGE PERFORMANCE SYSTEM:
X-ray Sensor: L Type Photo-Diode array detector 12bit.
Monitor: High resolution 17inch color LCD display.
Color Quality: 24 Bit real colors.
Edge Enhancement: Object contour edge is more distinct.
Super Image Enhancement: Image detail is more distinct.
High penetrate strength display: Increase brightness of dark area in image to display object which is behind high absorptivity mass distinctly.
Low Penetrate strength Display: increase contrast of low absorptivity mass (easy to penetrate) to display it distinctly.
Magnifier: Function of partial enlargement
Brightness/Dimming: Increase brightness of image/decrease brightness of image.
Image recurrence: Display previous twenty image and process any one of them.
Image restoration: Restore image to initial status at the time of stopping conveyor
Image storing: Real Time store any image and process it in operation status.
Multi-energy color: Display organic material for orange, display inorganic material for blue, and display mixture for green.
High energy / low energy: switch to display two energy type, high energy stands for metal etc. low energy stands for nonmetallic.
Auxiliay function for drugs & explosives: Help to detect such dangerous material as drugs& explosives etc.
Audible & visible alarm: Give sound and visible signal when conforming to condition.
ETHERNET TCP/IP FUNCTION
Storage Temperature: -20ºC to 60ºC
Operating Temperature: 0ºC to 45ºC
Relative Humidity: 20 to 95% non-condensing
System Power: 220 VAC (±10%) 50±3HZ
Power wastage: 1.5 KW (Max)
|Conveyor Max Load:||200kgs|
|Dose per Inspection:||<1.7μGy/h|
|Resolution:||<0.101mm Metal Wire|
|Film Safety:||Guarantee ISO1600 Film|
|X-ray Leakage:||<0.1μGy/h (at a distance of 5cm From external housing)|
|Generate angle:||80 degree|
|Anode power:||0.4 to 1.2mA|
|Cooling / Duty Cycle:||Oil Cooling /100%|
|X-ray Sensor:||L-Shaped Photodiode Array (mono-energetic), 12bit Deep|
|Monitor:||High Resolution Color, LCD Accord, 17 inch|
Edge enhancement, image strengthening, image lightening,
reducing darkening, image returning, image retrieval.
|Image Grey Level:||4096|
|Image Max Resolution:||1024 * 1280 pixel|
|Image Processing:||24bit for processing real time|
|Image storage:||Storage 60000 pictures in real time|
|Zones & Zoom:||
1-9 Image regions, 2, 4, 8, 16 Times Enlarge,
Whole screen continuous observation
|Power Consumption:||1.8 KW (max), 0.3KW(working)|
Factories (to find needle in clothing, shoes, bags),
Special events location
|Tunnel Dimension||1m(W) x 1m(H0 Approx||
|Measure through measuring tape or a baggage of this dimension should be passed through the machine|
|Conveyor Speed||0.2m/s||Verify Physically||Make a marker on the middle of the belt ,then use the stopwatch test the minute distance then calculate the Second length|
|Conveyor Height||300 mm||Verify Physically||Through measuring tape|
|Max Load||200 Kg(evenly Distributed||Verify Physically||Put the load equivalent to 200 kg and let it pass through the mechine|
|Resolution||38 AWG/40 AWG||Verify Physically||You can cut one of the wire to check this|
|Steel Penetration||30/38 mm||Use an organic things put into a 30mm plate then screen it, try to see if can screen the organic product in orange color|
|X-ray leakages||Less than 1µ Gy/hr (at a distance of 5cm from the housing), complying with all published international standards||Use a length 300mm,width300mm,height 75mm board to through the x ray machine ,Then watch the screen|
|Dose per inspection||Less than 1 µ Sv||Physically by functioning machine|
|Guaranteed for high speed film up to ASA/ISP 1600||Use Use the ISO 1600 Film through|
|X RAY GENERATOR|
|Anode Voltage||160 K.v.||Electrical test method and Procedure.||
Electrical test method and
|Use Power meter|
|Cooling||Sealed oil bath||Test Method and Procedure.||
|Duty Cycle||100%||Test Method and Procedure.||
|IMAGE ACQUISITION SYSTEM|
|X Ray Converter||L Shaped detector Line||Physically by functioning machine|
|Image Processing||24 bits||Physically by functioning machine|
|Image Storage Capacity||Up to 50,000 images||Physically by functioning machine|
|Image Display||Color, Black& White, Multi energy, Multi absorptivity, inorganic stripping, Super enhancement, negative, high/low penetration||Observe the output|
|Region of interest(ROI) and Zoom||Selectable image, zoom regions,-1-32 times continuous enlargement, 1-3 times local enlargement||Physically by functioning machine|
|Image Recall||Preceding image recallable||Physically by functioning machine|
|Display Monitor||17” high resolution LCD||Physically by functioning machine|
|Standard Functions||System menu, power on self test, dates/time display, luggage counter, certified number of operators, mains record. System On/Ray on timer, operating mode display, image storage||Physically by functioning machine|
|Optional||Explosives/Drugs Detection, Sound Alarm, Light alarm, image pic up system(CIS)||Physically by functioning machine|
-40 ° C to + 60 ° C
5% ~95%(Non Condensing)
-40 ° C to + 60 ° C
0 ° to + 40 °
5% ~95%(Non Condensing)
0 ° to + 40 °
|Power supply||110-240 VAC(+10% to 15% and 50 Hz/60 Hz (+/- 3 Hz)||Functional||110-240 VAC(+10% to 15% and 50 Hz/60 Hz (+/- 3 Hz)|
|Power Consumption||1.0 KVA||Functional||1.0 KVA|