ISO9001 CE Certificate Belt Conveyor Metal Detectors For Conveyors - Recycling And Plastics

Our metal detection equipment works in conjunction with our conveyors to protect your product and equipment from damage. The metal detectors listed below are specific to the Recycling and Plastics Industries.

Features of all V FINDER Metal Detectors

Innovative triple coil design

V FINDER Metal Detectors utilize triple coil design for the search head. This is comprised of windings around an aperture opening, whether round, or rectangular. There is a transmitter in the center, and two receivers (one at entrance of the search head, and one at the exit). Within the aperture opening, an electromagnetic field is created. When a piece of metal passes through the coil opening, a signal is generated and calculated at each and activates further operations or devices.

Resistant to water, vibration, and other interference

Metal detectors are highly sensitive pieces of equipment, and need to be protected from environmental interferences such as vibration and other electrical fields.

All search heads are filled with a catalyzed epoxy. There are no empty voids inside the housing, thereby eliminating the possibility of water intrusion to the coil, making them easy to clean. This exclusive epoxy also reduces the effect of vibration to the search head. Coils and electronics can be rated from IP54, to IP66 and IP69K.

Additionally the search head is manufactured with a special shielding against outside interferences. This allows V FINDER Metal Detectors to perform better in difficult environments, and require shorter metal free zones than our competition.

Innovative triple coil design

V FINDER Metal Detectors utilize triple coil design for the search head. This is comprised of windings around an aperture opening, whether round, or rectangular. There is a transmitter in the center, and two receivers (one at entrance of the search head, and one at the exit). Within the aperture opening, an electromagnetic field is created. When a piece of metal passes through the coil opening, a signal is generated and calculated at each and activates further operations or devices.

Resistant to water, vibration, and other interference

Metal detectors are highly sensitive pieces of equipment, and need to be protected from environmental interferences such as vibration and other electrical fields.

All search heads are filled with a catalyzed epoxy. There are no empty voids inside the housing, thereby eliminating the possibility of water intrusion to the coil, making them easy to clean. This exclusive epoxy also reduces the effect of vibration to the search head. Coils and electronics can be rated from IP54, to IP66 and IP69K.

Additionally the search head is manufactured with a special shielding against outside interferences. This allows V FINDER Metal Detectors to perform better in difficult environments, and require shorter metal free zones than our competition.

Specifications
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Note

1. 1. The technical parameter above namely is the result of sensitivity by detecting only the test sample on the belt. The sensitivity would be affected according to the products being detected, working condition and also the different positions the metal mixed with.
2. 2. Requirements for different sizes by customers can be fulfilled.